POWDER COATING OVENS AUSTRALIA
Custom powder coating
batch ovens.
From automotive components to fabricated steel and architectural products, configure an oven around your application.
Your parts set the starting point.
Internal working dimensions matter. Allow for the largest component, hanging arrangement and the space required to load and move your rack.
Electric ovens
Three phase heating with digital temperature control and forced air circulation. The required electrical supply is confirmed from the final oven specification.
EXPLORE ELECTRIC OVENS ↗Gas ovens
Gas fired heating and circulation systems configured to the chamber and workload. Fuel and burner configuration are agreed as part of the specification.
EXPLORE GAS OVENS ↗CUSTOM OPTIONS
What can be configured?
- Internal width × height × length
- Door and loading configuration
- Insulation thickness and temperature requirements
- Heating and air circulation system
- Trolleys, hanging rails and rack layout
- Digital control configuration
| Heating | Three phase electric or gas fired, as specified |
|---|---|
| Temperature | Up to 300°C depending on the final specification |
| Insulation | 100–150 mm insulated panels with high density rock wool, depending on size and heat requirements |
| Circulation | Forced air circulation |
| Controls | Digital control box or PLC touchscreen options, depending on the agreed configuration |
| Construction | Assembled units within 1900 mm internal width and 2100 mm internal height; larger sectional builds available, subject to design and transport arrangements |
| Trolleys | Custom batch trolley systems available |
Assembled or sectional supply.
Assembled ovens
The brochure lists assembled internal sizing generally up to 1900 mm wide, 2100 mm high and 9000 mm long. Suitability depends on the final design and transport arrangements.
Larger sectional ovens
Larger units can be supplied in sections for assembly on site, with drawings and instructions. Site access, assembly and contractor requirements need to be planned before ordering.
Systems are supplied to the agreed equipment specification. Site preparation, electrical works, gas fitting, installation, certification, engineering approvals and local compliance are the purchaser’s responsibility unless specifically agreed otherwise. Use appropriately licensed contractors for site work.
What is typically included?
- Oven chamber to the nominated internal dimensions
- Insulated walls and doors
- Specified heating and circulation systems
- Digital temperature control
- Operating documentation and instructions
- Factory inspection before dispatch
Trolley inclusions and any additional equipment are confirmed in your individual quote.
READ THE OVEN BROCHURE ↗DIGITAL OR TOUCHSCREEN
Choose your oven controls.
Digital control box
A digital temperature controller with the controls and indicators specified for your oven. This gives the operator a clear place to set and monitor the operating temperature.
PLC touchscreen option
A programmable logic controller (PLC) paired with a touchscreen can bring the oven’s operating information and settings together on one display. Screen functions are confirmed for the selected control system.
Set & monitor
Set temperature and view displayed temperature readings, hold time and remaining time on the example screens.
Operating status
The overview shown includes circulating fan and burner status, with menus for parameter settings and fault enquiries.
Temperature trend
The example temperature curve screen shows readings over time and a historical data menu.
Control hardware, screen layout, available functions and sensor configuration vary by the agreed specification. Ask us to include your preferred controls in the quote.
YOUR NEXT STEP
Planning a new setup or upgrading?
Tell us what you coat, your required internal oven size and your location. We’ll help put together a suitable system.
REQUEST A QUOTE ↗